The automatic sealing machine of TOM factory is mainly suitable for the sealing packaging of cartons, and the sealing machine adopts tape to seal the carton, which is economical, fast and easy to adjust. The sealing machine closes the product compactly, blocks the pollution damage of the outside dust, dust and chemical substances, ensures the newness of the goods, and also plays a moisture-proof role. It can complete the automatic sealing action of upper and lower at one time, which is firm and reliable.
Automatic sealing machine characteristics
(1) The sealing mechanism should be made by applying the screw and the transmission chain to adjust the two widths together.
(2) Using imported sealing machine spare parts new patented tape applicator, no need fan to blow up the tape, the use of patented tablet pressing candy equipment, so that the tape is firm and not easy to bend down and cause can not be pasted, the outer packaging of the sealing box is convenient and fast.
(3) The width of the belt design scheme has a stronger swell. The clasp connection design scheme will not have the situation of opening the rubber cracking, and the sealing machine should be easy to remove and replace the belt, convenient and fast.
(4) The sealing tape manufacturer innovates the design scheme of the large-scale transmission wheel in science and technology, increases the bending inclination, improves the belt contact surface, the belt is not easy to mistrack, and the service life is improved, and the sealing machine is very technical. The main transmission device of the professional sealing machine applies unique Cai Yunlong base precision processing, low noise, and improves the service life of the belt.
(5) The length of the folded edge of the tape at both ends of the carton can be adjusted.
(6) The sealing machine factory designs a series of products without tape alarm, and opens the door automatically to shut down the equipment to ensure the safety of maintenance.
Sealing machine fault solution
(1) The transmission ring is loose and cannot be positioned: the plastic steel bar and the transmission spring are inelastic. Remove the plate machine combination and reinstall the spring tip or replace the plastic steel bar and transmission spring.
(2) Air leakage at the piston rod: the bottom ring of the main body is damaged, and the ring needs to be replaced.
(3) Air leakage at the trigger: the switch valve ring or switch seat ring is damaged, and the ring needs to be replaced.
(4) Air leakage at the exhaust port: the switch valve ring or switch seat ring is damaged or the piston ring is damaged, and the ring needs to be replaced.
(5) The clamping action of the sealing machine is too slow or the clamping stroke is insufficient: the bolt is loose, and the front buckle or the inner piece of the plate machine is worn. At this point, the bolt can be tightened, paying attention to the correct position of the front buckle shaft. You can also replace the front buckle or the inner piece of the plate machine, after completing the above actions, test its function, if the stroke is too short, adjust the front buckle shaft upward, and adjust the front buckle shaft downward if the action is slow;
The automatic sealing machine of TOM factory is an automatic packing machine that automatically covers the back and down. It is necessary to open the carton unpacking machine to carry out the bottom sealing work, and then after packing, through the conveyor track driven by the belt on both sides, the corrugated carton folding device on the upper side of the sealing machine is started, and the folding and sealing of the box is completed at one time. When the size of the carton changes, fully automatic mechanical positioning, automatic folding of the top, automatic timely handling, no manual management, reduce labor costs, suitable for connecting fully automatic production lines.
