Early understanding:
Preliminary understanding is to prepare for installation. Learn about the composition and operation of the filling machine through the planning drawings, pictures, videos, and other information provided by the supplier in the early stage, and make corresponding preparations for water, electricity, and gas in advance.
Equipment placement：
Equipment placement includes location placement, the configuration of power supply, the configuration of air source, and configuration of water source; the following points are mainly emphasized during the installation process:
First check the completeness of the equipment and accessories according to the list provided by the supplier.
- After the equipment is docked, the machine needs to be leveled and the footpads are locked to reduce the vibration of the equipment.
- The power supply needs to be safely grounded, and the air source is required to be 0.4-0.6mpa, to maintain the stability of the air source, and the water inlet and drainage system is stable and reliable, safe and sanitary.
When the equipment is installed, the equipment supplier will arrange a sales service engineer to guide and train. During this process, relevant precautions need to be recorded to facilitate subsequent equipment maintenance.
Equipment maintenance：
Equipment failure will cause losses to the production enterprise, and the daily maintenance of the equipment is particularly important.
- Carefully read the instructions provided by the supplier and the notes during installation before operating the equipment, understand the principle of the equipment, and be familiar with the operation methods and debugging skills.
- To ensure the safety and stability of the supply of water, electricity, and gas systems, a backup plan for sudden abnormalities is required; and the above systems should be checked regularly.
- When the mineral water filling machine is in the running-in period, it is easy to leak in the fastening and lubrication, so it is necessary to check and maintain it in time.
- When the mineral water filling machine is found to be faulty, press the emergency stop button in time, turn off the power if necessary, check the cause, and eliminate the fault.
- The filling machine has strict requirements on the operating environment, and it needs to be cleaned every day before leaving get off work to keep the equipment dry and hygienic.
- Before restarting the machine that hasn’t been running for a long time, carefully check the in place of the water, electricity, and gas systems, the fastening of parts, the lubrication of the transmission system, and the replacement of wearing parts; first run at a slow speed for a period of time. Try the product again later.
