This machine is to manually place the barrels in the conveyor station, and transport them to the filling station through the conveyor belt, photoelectric detection, automatic positioning, automatic quantitative filling (coarse filling, fine filling), automatic barrels, etc. function to complete the filling of the barrel

This machine uses the working principle of self-flow weighing to realize the control of the filling amount. When filling, the signal is given by the weighing sensor, and the filling valve is controlled by the programmable logic controller (PLC). The structure is simple, the cleaning is convenient, and the joints are all The quick-release interface is adopted for easy disassembly.

The filling part of this machine is composed of fast filling and slow filling. At the beginning of filling, the fast filling valve and the slow filling valve are all opened to perform fast filling. When the filling reaches the fast feeding value, the valve is closed and slow filling Fill the position and perform slow filling to ensure the accuracy of the filling amount. When the filling reaches the target feed value, the slow filling valve is closed.

The feeding system of this machine is designed with a special plugging device to prevent the leakage of materials after filling.

The barrel is automatically aligned with the motor. When the barrel is in place, the barrel is clamped by the cylinder, and the barrel starts to rotate. The position of the barrel mouth is detected by photoelectricity, and the barrel automatically stops rotating when it is sensed.