Tom‘s sleeve labeling machine has been fully affirmed by the majority of customers because of its excellent high-speed stable performance, unique dexterous design, and human-machine coordinated safety mode.
How does the sleeve labeling machine work
The sleeve labeling machine is When a bottle on the conveyor belt passes through the bottle detection eye, the servo-controlled drive group will automatically send a label, and the brushing wheel group will brush the next label, and the label will be sleeved on the bottle. If the position of the positioning detection sensor is incorrect at this time, the label cannot be inserted into the bottle smoothly.
How to solve problem of sleeve labeling machine
The shrink film in the sleeve labeling machine is easy to accumulate or jam in the center column
Reasons:
1. The control of the folded diameter of the membrane material during manufacture is too large or too small, especially in the lower line (smaller) of the standard size, which is more likely to cause material accumulation in the central column.
2. The clamping point of the central column is more likely to cause unstable clamping, so that the central column cannot become a line and cause material accumulation.
3. The adjustment strength of the upper and lower driving rubber wheels is inconsistent.
4. When the edge of the cutter returns to the origin every time it turns, it may stop in the groove of the center column, causing the film label to touch the blade and form material accumulation.
5. The groove of the central column may be “cut” by the cutter, which will cause the subscript to be unsmooth and cause the material to jam.
6. When the cut label is waiting to be brushed off, the brushing wheel does not smoothly insert the cut label into the bottle body, resulting in a domino effect, and the reaction returns to cause material accumulation in the center column.
1. Multi-point clamping sleeve labeling machine equipment is better than single-point clamping, but each brand of sleeve labeling machine has different designs, so users should choose carefully when purchasing.
2. Correctly adjust the strength of the upper and lower driving rubber wheels of the sleeve labeling machine
3. Check whether the origin of the cutter is correct, and check the matching of the whole process control. Be sure to drive the next sheet of material within the effective time after the cutter leaves the center column. In addition, the cutter should stay inside the cutter head every time it stops, and it should not be too close to the groove of the center column, so as to ensure that no material is accumulated.
4. If there is a cut in the groove of the central column, it can be smoothed after the surface treatment.
5. It is necessary to confirm whether the clamping contact between the brush lower wheel set and the central column is indeed not offset, and whether the brush lower wheel is worn so that the force under the brush cannot evenly brush the label and fall into the bottle, otherwise the label will be will cause a chain reaction to the accumulation of material in the center column.
Tom is a mechanical equipment company specializing in automatic bottle unscrambler and sleeve labeling machine. Our company has strong technical development force, advanced technology, sophisticated processing technology, thoughtful service and installation, and has the most professional manufacturing team.
