The packaging machine can be widely used in the determination and update of the original formula of fresh milk, yogurt, goat milk, camel milk, fruit juice, milk-containing beverages and condiments, the identification of product taste, the evaluation of color, the application of stabilizer and emulsifier, New product development and sample making. It can be used in combination with multiple tanks as required, which is very suitable for large-scale production lines and small and medium-sized dairy production units for large-scale and multi-variety use.
The vacuum packaging machine is a vacuum packaging machine specially designed for food body fitting. The main principle of the machine is to heat the body film, and at the same time, it is equipped with a vacuum pump for vacuuming, and the film is tightly attached to the product and the tray. It is both beautiful and fresh, and this is also the most widely used vacuum packaging machine on the market.
Features
1. Double frequency conversion control, the bag length can be set and cut immediately, no need to adjust the idling, one step, saving time and film.
2. Human-machine interface, the parameter setting is convenient and quick.
3. Fault self-diagnosis function, fault display is clear at a glance.
4. High-sensitivity photoelectric eye color mark tracking, digital input of sealing and cutting position, so that the sealing and cutting position is more accurate.
5. Temperature-independent PID control, better suitable for various packaging materials.
6. Positioning stop function, no sticking to the knife, no waste of film.
7. The transmission system is simple, the work is more reliable, and the maintenance is more convenient.
8. All controls are realized by software, which is convenient for function adjustment and technical upgrade, and never falls behind.
Scope of application
Suitable for biscuits, rice cakes, snow cakes, egg yolk pie, chocolate, bread, instant noodles, moon cakes, daily necessities, industrial parts, pharmaceutical industry, disposable products, hardware products, plastic products, toys and stationery, industrial supplies, auto parts, etc. or Packaging of various regular solid objects such as cartons and trays.
Preparation before using the vacuum packaging machine
1. The machine is placed stably, check whether the cover is closed smoothly and whether it jumps up automatically after letting go. You can adjust the adjusting bolts under the working room to make the cover jump up automatically, but the force of the jump should not be too large.
2. Equipped with a power supply that meets the requirements of the model.
3. Check whether the position of the oil level of the vacuum pump is correct, if not, adjust it (see the instruction manual of the vacuum pump for details).
4. Ground the machine well.
5. Turn on the power, turn on the power switch, close the cover, and check whether the vacuum pump is running normally. (If the air is not exhausted, any two-phase wires in the three-phase power wires should be exchanged).
Precautions when using
1. Turn on the power switch.
2. Flip open the packing bag, put the packing bag containing the packaged items into the workroom, and place the sealing part on the silicone rubber strip.
3. Press down on the working chamber (or press the edge of the upper cover) and close the cover. The machine will automatically complete the vacuum packaging process and automatically open the cover according to the program. Some equipment is equipped with an emergency stop switch.
4. Open the vacuum cover and take out the packaging bag to complete a working cycle.
5. Turn off the power switch and pull out the power plug when it stops working.
If you are looking for a suitable filling and packaging machine manufacturer, you can get in touch with TOM.
